how to use netcut to find a Computer’s IP or its Hostname
Click on the Find Button , input the hostname or the IP address of the computer you want to locate. and Click on OK. NetCut will find the computer and select it for you.
Category Archives: Support Documents
NetCut / netcut defender/ netcut for android related document
Inside netcut How to Copy and paste ALl the IP addresses , MAC Addresses , Hostname in my LAN ?
Inside netcut, How to Copy and paste so I can print ALl the IP addresses , MAC Addresses , Hostname in my LAN ?
Click on the PrintTable Button , the Pop Up window bottom shows the Statics of all the Computer’s IP, MAC addresses , Hostname. which you can do slect all and copy , so you can paste to some where else to print out. or even export to excel
How to change netcard && net adapter
Inside netcut How to change netcard, net adapter
Click on the Chang NIC , the Pop Up window bottom shows the current netCard in Use. Click on the netcard name you want chang to in the NetCard List,Then Click On OK
Note: Only Chang the netcard when only you can not see any computer at computer list.
Why not be able to change wireless netCard MAC address
Why not be able to change wireless netCard MAC address?
It happen mostly under windows7, main reason Because the wireless card’s driver is not properly wrote. the solution is simple. remove the netcard driver and use a windows XP driver.
What’s MAC address
MAC address is the physical address of net card. Operation system allow reset this address to a new value. Inside netCut, you can change Any adapter’s physical address. The MAC address is fixed length string. example like: [06:21:00:87:2D:2A]
A Media Access Control address (MAC address) is a unique identifier assigned to network interfaces for communications on the physical network segment. MAC addresses are used for numerous network technologies and most IEEE 802 network technologies including Ethernet. Logically, MAC addresses are used in theMedia Access Control protocol sub-layer of the OSI reference model.
MAC addresses are most often assigned by the manufacturer of a network interface card (NIC) and are stored in its hardware, the card’s read-only memory, or some other firmware mechanism. If assigned by the manufacturer, a MAC address usually encodes the manufacturer’s registered identification number and may be referred to as the burned-in address. It may also be known as an Ethernet hardware address (EHA), hardware address or physical address. A network node may have multiple NICs and will then have one unique MAC address per NIC.
MAC addresses are formed according to the rules of one of three numbering name spaces managed by the Institute of Electrical and Electronics Engineers (IEEE): MAC-48, EUI-48, and EUI-64. The IEEE claims trademarks on the names EUI-48 and EUI-64, in which EUI is an acronym for Extended Unique Identifier.