[tc88Participant]

hey admin

upon further testing I discovered the root of the problem
netcut keeps all speed burst history until netcut is restarted
I have not restarted netcut in close to a week so there was a week of speed burst data being shown
after net stop/net start aips it is good as new with no dashboard lag

so perhaps a good solution to this would just be to flush speed burst history after x amount of time (1 day, etc)

in the meantime a good solution is just to restart netcut every couple days

• This reply was modified 3 years, 10 months ago by  tc88.

[tc88Participant]

Thanks admin! Maybe one of these suggestions can help

-Speed burst boxes are automatically open, and you click eye line to close them. Reverse this? So you click eye line to show speed bursts, but they are default closed.

-Limit number of speed burst shown, for example I don’t need to see speed burst boxes for the entire day. Thats what makes a huge wall of speed burst boxes. Maybe make an option to limit it to X minutes. “Speed bursts in the past hour” or an optional time.

• This reply was modified 3 years, 10 months ago by  tc88.

[tc88Participant]

hey admin,

I am able to click the eye line, but only after a very long wait. just a suggestion, it might be best if the traffic burst report is automatically hidden. I’m not sure if it is one week or one day’s worth of traffic, I believe it could be one days worth

[tc88Participant]

hey admin, thanks for reply

I’ve tried reboot and clear browser cache.

It seems to happen when there are many “speed brust” boxes open, for example here is a video:
https://drive.google.com/file/d/1BjMqSXVKvC2TC7KyC5Ln_iiI-cveVA7f/view?usp=sharing

You can see one user has many speed brusts which also creates some visual bugs on the page, and also causes the page to load very slowly (just the netcut page, not the internet)

when I am able to close the speed brust boxes, the page responds as normal.

[tc88Participant]

Hey admin just an update on this issue. I believe its in my router 🙂 because so many devices are connecting, it is getting confused during the DHCP / IP renewal process.

After assigning static IPs to a few devices, they are not having problems with disconnection / unable to connect to WiFi.

[Author]

Posts